Scotia Sea depth map

Sea: average depth about 310 m, deepest 927 m (GEBCO_2026 grid).

Tap or scroll to load the interactive map

Sea level todayDrag the slider to lower the sea and see the land that would appear.

Sea level in metres below today’s. A simple bathtub model: it lowers the sea everywhere by the same amount and does not simulate how the water would really drain.

Key

Sea depth

  • Deeper than 6,000 m
  • 4,000 to 6,000 m
  • 2,000 to 4,000 m
  • 1,000 to 2,000 m
  • 200 to 1,000 m
  • Shallower than 200 m (the continental shelf)

Land height

  • Land up to 500 m
  • 500 to 2,000 m
  • Above 2,000 m

Drain the oceans

  • Seabed exposed when the sea is lowered A dashed white line marks today’s coast.

How to read the map. Darker blue is deeper water. Tap anywhere to see how deep the sea is there, or how high the land is, and the nearest named undersea feature. Depths come from the GEBCO_2026 grid, which in most of the deep ocean is predicted from satellite measurements of the sea surface rather than surveyed by ship, and the map’s tiles are coarser than the grid, so narrow trenches read shallower on the map than their true depth. Not for navigation.

Scotia Sea at a glance

  • 310 maverage depth
  • 250 mmedian depth
  • 927 mmaximum depth
  • 182 km²water area

Scotia Sea is a sea. Inside its outline the GEBCO grid has about 182 km² of water, with an average depth of about 310 m (the middle value is 250 m) and a maximum of 927 m, found at 61.20° S, 54.45° W.

Treat these figures with care. The outline for this area covers only 182 km² of sea in the grid, below the 1,000 km² we need to publish statistics we trust, so this page is not indexed.

Open the map at the deepest cell and tap to read the depth.

How deep is each part of the Scotia Sea?

The bar splits the Scotia Sea's water by depth. Each colour is a depth band, and the shares add up to 100%.

  • 0 to 200 m: 37.3%
  • 200 to 1,000 m: 62.7%
  • 1,000 to 4,000 m: 0%
  • 4,000 to 6,000 m: 0%
  • below 6,000 m: 0%

Named features near the deepest point: Wordie Seamount (85 km), Monte Cjavals (107 km), Orca Seamount (249 km), Shackleton Fracture Zone (331 km).

The Scotia Sea if sea level dropped

The slider on the map lowers the sea in steps. This table shows how much of the Scotia Sea's water would be land at each step.

Sea level lowered byBecomes landShare of its water
10 m3 km²1.8%
20 m5 km²2.7%
50 m20 km²10.9%
80 m32 km²17.3%
120 m50 km²27.3%
200 m68 km²37.3%
500 m136 km²74.6%
1,000 m182 km²100%
2,000 m182 km²100%
3,000 m182 km²100%
4,000 m182 km²100%
6,000 m182 km²100%

A simple bathtub model: it lowers the sea everywhere by the same amount and does not simulate how water would really drain.

Nearby seas

Nearest by the centre of each outline. All oceans and seas

Frequently asked questions

How deep is the Scotia Sea?

On average about 310 m in the GEBCO grid (the middle value is 250 m). The deepest cell inside its outline is 927 m, at 61.20° S, 54.45° W.

How big is the Scotia Sea?

About 182 km² of water inside its Natural Earth outline, counted from the grid cells that are below sea level.

How much of the Scotia Sea would be land if sea level dropped?

With the sea 10 m lower, about 3 km² (1.8%) of its water would be land. At 6,000 m lower, 100% would be. This is a simple bathtub model that lowers the sea evenly everywhere.

Data: depths from the GEBCO_2026 grid, statistics worked out inside the Natural Earth outline of the sea. See data sources and licences. The GEBCO Grid should NOT be used for navigation or for any other purpose involving safety at sea.

All oceans and seas · Undersea features · Drain the oceans

Embed this map

Copy this code into your web page. It is free to use. Please keep the link under the map, as it is how people find where the map comes from.