Vil'kitskogo Strait depth map

Strait: average depth about 122 m, deepest 230 m (GEBCO_2026 grid).

Tap or scroll to load the interactive map

Sea level todayDrag the slider to lower the sea and see the land that would appear.

Sea level in metres below today’s. A simple bathtub model: it lowers the sea everywhere by the same amount and does not simulate how the water would really drain.

Key

Sea depth

  • Deeper than 6,000 m
  • 4,000 to 6,000 m
  • 2,000 to 4,000 m
  • 1,000 to 2,000 m
  • 200 to 1,000 m
  • Shallower than 200 m (the continental shelf)

Land height

  • Land up to 500 m
  • 500 to 2,000 m
  • Above 2,000 m

Drain the oceans

  • Seabed exposed when the sea is lowered A dashed white line marks today’s coast.

How to read the map. Darker blue is deeper water. Tap anywhere to see how deep the sea is there, or how high the land is, and the nearest named undersea feature. Depths come from the GEBCO_2026 grid, which in most of the deep ocean is predicted from satellite measurements of the sea surface rather than surveyed by ship, and the map’s tiles are coarser than the grid, so narrow trenches read shallower on the map than their true depth. Not for navigation.

Vil'kitskogo Strait at a glance

  • 122 maverage depth
  • 122 mmedian depth
  • 230 mmaximum depth
  • 10,510 km²water area

Vil'kitskogo Strait is a strait. Inside its outline the GEBCO grid has about 10,510 km² of water, with an average depth of about 122 m (the middle value is 122 m) and a maximum of 230 m, found at 77.84° N, 103.85° E.

Open the map at the deepest cell and tap to read the depth.

How deep is each part of the Vil'kitskogo Strait?

The bar splits the Vil'kitskogo Strait's water by depth. Each colour is a depth band, and the shares add up to 100%.

  • 0 to 200 m: 86.9%
  • 200 to 1,000 m: 13.1%
  • 1,000 to 4,000 m: 0%
  • 4,000 to 6,000 m: 0%
  • below 6,000 m: 0%

Named features near the deepest point: St. Anna Trough (743 km), East Gakkel Ridge at 85 E (903 km), Nansen Basin (955 km), Karasik Seamount (1,111 km).

The Vil'kitskogo Strait if sea level dropped

The slider on the map lowers the sea in steps. This table shows how much of the Vil'kitskogo Strait's water would be land at each step.

Sea level lowered byBecomes landShare of its water
10 m154 km²1.5%
20 m386 km²3.7%
50 m1,635 km²15.6%
80 m2,554 km²24.3%
120 m5,079 km²48.3%
200 m9,134 km²86.9%
500 m10,510 km²100%
1,000 m10,510 km²100%
2,000 m10,510 km²100%
3,000 m10,510 km²100%
4,000 m10,510 km²100%
6,000 m10,510 km²100%

A simple bathtub model: it lowers the sea everywhere by the same amount and does not simulate how water would really drain.

Nearby seas

Nearest by the centre of each outline. All oceans and seas

Frequently asked questions

How deep is the Vil'kitskogo Strait?

On average about 122 m in the GEBCO grid (the middle value is 122 m). The deepest cell inside its outline is 230 m, at 77.84° N, 103.85° E.

How big is the Vil'kitskogo Strait?

About 10,510 km² of water inside its Natural Earth outline, counted from the grid cells that are below sea level.

How much of the Vil'kitskogo Strait would be land if sea level dropped?

With the sea 10 m lower, about 154 km² (1.5%) of its water would be land. At 6,000 m lower, 100% would be. This is a simple bathtub model that lowers the sea evenly everywhere.

Data: depths from the GEBCO_2026 grid, statistics worked out inside the Natural Earth outline of the strait. See data sources and licences. The GEBCO Grid should NOT be used for navigation or for any other purpose involving safety at sea.

All oceans and seas · Undersea features · Drain the oceans

Embed this map

Copy this code into your web page. It is free to use. Please keep the link under the map, as it is how people find where the map comes from.